16
EnglishDeutschFrançais DanskEspañolItalianoSvenska Nederlands
Program Recording Connections
Connecting your cable/satellite box to
your VCR/DVR
To record programs from your cable or satellite service, you can connect
your cable/satellite box to your VCR or DVR. The diagram on this page
is an example of how this equipment may be connected.
Before you start, make sure that your cable/satellite box and VCR/DVR
have the necessary input and output connectors available.
Connect an unused video output on your cable/satellite box to an
unused video input on your VCR/DVR. Choose the connection
type that provides the highest level of image quality. Refer to
page 7.
Connect an unused audio output on your cable/satellite box to an
unused audio input on your VCR/DVR.
Recording programs
Using the connection method in the example diagram, you do not need
to select the CBL-SAT source in order to record the program. If you
wish, you can listen to another source while recording.
1
2
VCR/DVR video
to the VS-2
Cable/satellite video to the VS-2
VCR/DVR audio to
the media center
Cable/satellite audio
to the media center
VS-2
LIFESTYLE
®
media center
1
2
To Next Page
Need help?
General
