REFERENCE
Accessories
Troubleshooting
Bose offers additional receivers as well as extension/expansion cables and adapter kits for
use with the
Bose®
link AL8 Homewide Wireless Audio Link.
For further information, contact your Bose dealer or Bose Customer Service. For Bose
contact information, refer
to
the address sheet included
in
the carton.
Problem
What
to do
No sound
•
For both the transmitter and the receiver, make sure:
- the audio source is plugged
in,
turned on, and working.
- the
Bose®
link A cable is securely connected at both ends. Refer
to
"Making the connec-
tions" on page
6.
- the small connector end
of
the power cord is inserted firmly into the AC Power jack on the
connection panel and the power pack is plugged securely into a working AC outlet.
- the Setup code switches on the connection panel
of
the transmitter and the receiver are set
identically. There are four options: 1
&2 up; 1 &2 down; 1 up &2 down; 1 down & 2 up.
- the Status
LEOs
are lit a solid green to indicate solid communication between the two parts.
If not, refer
to
the next Problem
in
this table.
•
For the expansion room products, make sure:
- the system, amplifier, or powered speaker is plugged
in
and turned on.
On
an
SA-2 or SA-3
amplifier
in
that room, make sure the status LED is lit to indicate the amplifier is working.
- the room code is set on the Bose link remote control or PERSONAL®music center
II
to
match the room codes
on
the amplifier or powered speaker and are unique to this expansion
room.
- the house code is set on the Bose link remote control or PERSONAL music center
II
to
match the house code
of
the
L1FESTYLE®
system
in
the main room.
Above problem
•
Move the receiver and transmitter closer together.
persists and the
•
Move the receiver, the transmitter, or both so the transmission path between them does not
Status
LED
lights
intersect with large metal objects (like a refrigerator), impervious construction materials (like
are not solid green
thick masonry) or other obstructions (like a pool
of
water).
•
Check to see if the Status
LEOs
turn green as a result of the above efforts. For details, refer
to
"Check the indicators and settings" on page
8.
Interference with
•
For interference with a Wifi network, use the Channel button on the connection panel
of
the
a WiFi network,
transmitter
to
alleviate the problem. For details, refer
to
"The transmitter Channel button" on
telephone,
TV,
page
9.
or other electronic
•
For interference with a telephone,
TV
or other electronic device, move the transmitter or
device
receiver farther from the device.
Interference from a
•
Reposition the transmitter so it is
in
a more open area.
microwave oven
•
Move the receiver farther from the microwave.
10
To Next Page
Loading...
Need help?
General
