SETUP
Making
the
connections
You
can connect one transmitter and up
to
8 receivers for each
LIFESTYLE®
system.
The transmitter and receiver each use one of the
two
supplied
Bose®
link A cables, which are
7 feet
(2
meters) long. Each unit also connects
to
power using one
of
the
two
supplied power
packs.
J
Note:
Instructions for use with a non-Bose tuner/receiver vary slightly from those below. For
details, refer to "Instructions for non-Bose
or
older Bose products" on page
7.
For
the
transmitter
1.
Connect one end
of
a Bose link A cable
to
the jack labeled
Bose®
link INPUT on the
transmitter connection panel.
2.
Connect the other end
of
the cable
to
the Bose link speaker jack, below the Main
Speaker jack,
on
the
LIFESTYLE®
media center connection panel (Figure
3).
Figure
3
Transmitter connecting to a
LIFESTYLE? media center
AC
Power
Bose®
link
INPUT
LIFESTYLE®
media
center
Main Speaker jack
Bose link Speaker jack
J
Note:
If
another
product
is
already connected to the Bose link Speakerjack on the media
center, disconnect it there.
You
can use the wireless audio link to replace this wired connection.
Or,
to continue using this connection, reconnect the cable to the
jack
labeled
Bose®
link OUTPUT
on the transmitter connection panel (Figure
4).
Bose link Speaker jack
LIFESTYLE®
media
center
Other product connection Transmitter connection
Transmitter
and
another
product
connecting to a
LIFESTYLE? media center
Figure
4
3.
Insert the small plug on the power pack cable into the AC Power jack on the transmitter
and plug the pack into a wall outlet.
The Status
LED
lights
to
verify this power connection.
J
Note:
For information on the meaning
of
the different Status
LEO
lights, refer to "Check the
indicators
and
settings" on page
8.
6
To Next Page
Loading...
Need help?
General
