21
|
ENGLISH
ACOUSTIC NOISE CANCELLATION
TAP CONTROL FOR TALK-THROUGH COMMUNICATION
When you need to focus on interpersonal communication coming from a specific
direction, you can automatically set noise cancelling to Low on single earbud by
firmly double-tapping the earbud.
NOTES: By default, Tap Control set to O.
Tap Control is available only when the Acoustic Noise Cancelling
™
switch is in
the High or Medium position.
1. Make sure the Acoustic Noise Cancelling
™
switch is in the High or Medium position.
2. Set the Tap Control switch to On.
See “Change the operation switches” on page 23.
3. Firmly double-tap the earbud.
2X
NOTE: Tap Control is not a touch control feature. You must firmly double-tap the
earbud in order to activate the feature.
Reset Tap Control
To reset Tap Control and set noise cancelling in both earbuds to the Acoustic Noise
Cancelling
™
switch level, double-tap the earbud with Tap Control active or move the
switch to another position.
To Next Page
Need help?
General
