33
|
ENGLISH
BLUETOOTH CONNECTIONS
Bluetooth wireless technology lets you stream audio from mobile devices such as
smartphones, tablets, and laptop computers. Before you can stream audio from a
device, you must connect the device with your headset.
CONNECT USING THE BLUETOOTH MENU ON YOUR
MOBILE DEVICE
1. Make sure the Bluetooth priority switch is in the Mute or Mix position.
See “Change the operation switches” on page 23.
NOTE: If the Bluetooth priority switch is set to O, Bluetooth is disabled.
2. Press and hold the Bluetooth/Multi-function button l for one second.
The Bluetooth indicator blinks purple.
3. On your mobile device, enable the Bluetooth feature.
TIP: The Bluetooth feature is usually found in the Settings menu.
4. Select the headset from the device list.
Once connected you hear a tone, and the Bluetooth indicator blinks blue.
NOTES: After five minutes of inactivity, the headset automatically exits pairing mode,
and the Bluetooth indicator turns o. To turn the Bluetooth feature back on,
press l.
Each time you turn on the Bluetooth feature, the headset attempts to
reconnect with the two most recently connected Bluetooth devices. If the
device(s) are turned o or out of range, the headset returns to pairing mode
after five minutes. See “Reconnect a mobile device” on page 36.
To Next Page
Need help?
General
