18 - English
Using the System
Battery protection mode
When the SoundTouch
™
Portable system is unplugged and unused for several days
or one day with a remaining charge of less than 10 percent, it enters battery
protection mode to preserve battery power. To reactivate the system, connect it to
AC (mains) power.
Note: Do not store your system for extended periods when the battery status icon
on the display indicates less than 20 percent capacity
.
When not in use, store the system in a cool place. Do not store the system
fully charged for long periods of time.
Replacing the battery
Rechargeable batteries periodically need replacement. The lifetime of a battery
depends on usage and volume settings.
You may need to replace the battery if you must recharge the battery more often.
For replacement batteries, contact the Bose
®
organization in your country or re-
gion. Visit global.Bose.com for Bose contact information.
CAUTION: Only use replacement batteries purchased through Bose Coporation
or authorized dealers. Using unauthorized batteries may compromise
safety and regulatory requirements and could lead to fire hazards.
To replace the battery:
1. Power off and uplug the system from AC (mains) power.
2. Place the system on a soft blanket.
3. Use the 2.5 mm supplied hex wrench to remove the screws on the bottom of
the system.
4. Place the system, display-side down, with button pad facing you.
5. Press both thumbs on the top edge of the rear cover.
6. Push the cover off the system.
AUX IN
SETUP
POWER
20V
To Next Page
Loading...
Need help?
General
Weight and Dimensions
