11
English
Care and cleaning
Use an alcohol swab or cotton swab moistened with alcohol (70% isopropyl) to clean
the thermometer casing and the measuring probe. Ensure that no liquid enters
the interior of the thermometer. NEVER use abrasive cleaning agents, thinners or
benzene for cleaning and NEVER immerse the instrument in water or other cleaning
liquids. Wait 10 minutes after cleaning before taking a temperature measurement.
NEVER insert a sharp object into the scanner area or any other open surface on the
thermometer.
Replacing the batteries
Replace with 2 new AAA batteries when the ashing battery symbol appears on
the LCD screen. To change the batteries, slide open the battery cover and remove
batteries. Replace the batteries being sure to align properly as indicated inside
the battery compartment. Remove the batteries from the product if not used for
extended periods of time in order to avoid damage to the thermometer resulting
from a leaking battery.
To protect the environment, dispose of empty batteries at appropriate
collection sites according to national or local regulations.
Limited warranty
This product comes with limited warranty commencing on the date of purchase.
Within the warranty period we will eliminate, free of charge, any defects in the
appliance resulting from faults in materials or workmanship, by replacing the
complete appliance.
This warranty is applicable only for the appliance supplied by the appointed
distributor. This warranty does not cover: damage due to improper use, normal wear
or use as well as defects that have a negligible eect on the value or operation of
the appliance. The warranty becomes void if repairs are undertaken by unauthorized
persons and if original Braun parts are not used.
Calibration
The thermometer is initially calibrated at the time of manufacture. If this
thermometer is used according to the use instructions, periodic re-adjustment is
not required. If at any time you question the accuracy, please contact Consumer
Relations.
Manufacturing date is given by the LOT number located inside the battery
compartment of the thermometer. The rst three (3) digits after LOT represent the
Julian date that the product was manufactured and the next two (2) digits represent
the last two numbers of the calendar year the product was manufactured. The last
identiers are the letters that represent the manufacturer.