Page 3Supplement 29376
Series A6 and Installation Supplement 29376
Series A6 & Installation Supplement 29376
DOOR OPENING
Lift Base Plate
NEG.
POS.
Pum
p
Module
B
attery
Chassis
Pump Mounted Ground Cable:
Route the pump ground cable through the plastic
floor grommet (shown in Figure 1 and the photo on
manual page 17). Position and secure the ground
cable clear of lift operation. Secure the cable to a
main vehicle framing member. Drill a 9/32" diameter
pilot hole in the frame. Mount the cable using a 5/16-
18 x 3/4" thread cutting screw. Position a 5/16"
external tooth star washer between the cable eye
terminal and the frame. Prepare the cable mounting
surface and apply grease to frame and hardware as
previously detailed (see Note on page 2).
Power Cable
Route, secure and connect the power cable as
detailed on pages 17 and 18 of this manual.
Vehicle Battery Ground Cable:
The external battery-to-frame ground cable supplied
with the lift must be connected to the same vehicle
framing member that the pump ground cable is
attached to. Connect the cable to the negative (-)
battery post. Note: A 3/8-16 x 1" bolt and a 13/32"
I.D. x 1/2" tubing spacer are provided for side
terminal mount batteries.
Secure the opposite end of the cable to the vehicle
framing member. Drill a 9/32" diameter pilot hole in
the frame. Mount the cable using a 5/16-18 x 3/4"
thread cutting screw. Position a 5/16" external tooth
star washer between the cable eye terminal and the
frame. Prepare the cable mounting surface and
apply grease to frame and hardware as previously
detailed (see Note on page 2).
Pump-Mounted Ground Cable
Battery-to-Frame
Ground Cable
Grommet
5/16-18 x 3/4"
Thread Cutting
Screw
5/16"
External
Tooth
Star
Washer
Connect battery-to-frame ground
cable to negative (-) battery post.
Figure 1
Lift Ground (continued)
Power Cable and Ground Cable Installation
(reference page 17)
5/16" External
Tooth Star Washer
5/16-18 x 3/4"
Thread Cutting Screw
Note: The pump
ground cable and
battery-to-frame
ground cable must
be mounted to a
common vehicle
framing member to
provide optimum
ground.
To Next Page
Loading...
Need help?
General
