Briggs & Stratton 076000NG User Manual

20
2
GENERATOR AC CONNECTION
SYSTEM
A single-phase, three-wire AC connection is
used in the Home Generator System. The stator
assembly consists of a pair of stationary
windings with two leads brought out of each
winding. The junction of leads L2 & L3 forms the
neutral lead, as shown schematically and as
wiring diagram (Figure 6). A complete schematic
and wiring diagram can be found later in this
manual.
NOTE: Neutral is not bonded to ground at
generator.
Figure 6

Briggs & Stratton 076000NG Specifications

General

Brand	Briggs & Stratton
Model	076000NG
Category	Inverter
Language	English