Brother 2040 User Manual

Routine maintenance
5 - 8
5
Replacing the drum unit
Note
We recommend that you clean the printer when you replace the drum unit. See Cleaning on page 5-11.
Follow these steps to replace the drum unit.
1 Make sure that the printer is turned on and the Drum LED
is blinking. Open the front cover of the printer.
2 Press and hold down the Go button for about 4 seconds
until all the LEDs light up. Once all four LEDs are lit,
release the Go button.
3 Pull out the drum unit and toner cartridge assembly.
IMPROPER SETUP
Do not reset the drum counter when you replace only the
toner cartridge.

Brother 2040 Specifications

General

Print Technology	Laser
Connectivity	USB 2.0
Memory	8 MB
Duplex Printing	Manual
Print Speed	20 ppm
Print Resolution	2400 x 600 dpi
Paper Capacity	250 sheets
Supported Operating Systems	Windows, Mac OS