11
Accessories
After opening the box, check that the following accessories are included. If any item is missing or damaged,
contact your dealer.
Included accessories
The following items should also be included in the box.
Note
(For U.S.A. only)
● Foot controller: Model T
This foot controller can be used on this machine
model NV10.
● The screw for the presser foot holder is available
through your authorized dealer.
(Part code: XA4813-051)
1. 2. 3. 4. 5. 6. 7. 8. 9.*
10. 11. 12. 13. 14. 15. 16. 17.
18. 19. 20. 21. 22. 23.
* 75/11 1 needle
90/14 1 needle
100/16 1 needle
No. Part Name
Part Code
No. Part Name
Part Code
U.S.A./
Canada
Others
U.S.A./
Canada
Others
1 Buttonhole foot “A” XC2691-033 13 Spool cap (large) 130012-054
2 Overcasting foot “G” XC3098-031 14 Spool cap (medium) XE1372-001
3 Zipper foot “I” X59370-021 15 Spool cap (small) 130013-154
4
Zigzag foot “J”
(on machine)
XC3021-051
16 Extra spool pin XE2241-001
17 Spool net XA5523-020
5 Blind stitch foot “R” X56409-051
18 Foot controller
XD0501-021 (EU area)
XC8816-021 (other area)
6 Button fitting foot “M” 130489-001
7 Seam ripper X54243-051 19 Operation manual XE2430-001
8 Bobbin (4) SA156 SFB (XA5539-151) 20 Quick reference guide XE2429-001
9 Needle set XC8834-021 21 Accessory bag XC4487-021
10 Twin needle X59296-121 22 Disc-shaped screwdriver XC1074-051
11 Cleaning brush X59476-021 23 Soft case XC1103-022
12 Screwdriver (large) XC8349-021