45
2
c
After sewing 3 to 5 stitches, press
(reverse/reinforcement stitch button).
Keep (reverse/reinforcement stitch button)
held down until you reach the beginning of the
stitching.
a Reverse/reinforcement stitch button
While (reverse/reinforcement stitch button)
is held down, reverse stitches are sewn.
d
After sewing back to the beginning of the
stitching, release (reverse/reinforcement
stitch button).
X The machine stops sewing.
e
Press (start/stop button), or press down on
the foot controller.
X The machine starts sewing in the
normal sewing direction.
f
When the end of the stitching is reached,
press (reverse/reinforcement stitch
button).
Keep (reverse/reinforcement stitch button)
held down until 3 to 5 reverse stitches are
sewn.
X While (reverse/reinforcement stitch
button) is held down, reverse stitches
are sewn.
g
After 3 to 5 reverse stitches have been sewn,
release (reverse/reinforcement stitch
button).
X The machine stops sewing.
h
Press (start/stop button), or press down on
the foot controller.
At this time, if (start/stop button) is held
down, the machine sews at a slow speed.
X The machine starts sewing in the
normal sewing direction.
i
After sewing to the end of the stitching, stop
the sewing machine.
Press (start/stop button) or release foot
controller.
a Beginning of stitching
b End of stitching
■ Sewing reinforcement stitches
When sewing stitches other than straight or zigzag
stitches that are secured with reverse stitching,
pressing (reverse/reinforcement stitch button)
sews reinforcement stitches, 3 to 5 stitches on top
of each other.
a Reverse stitching
b Reinforcement stitching
Memo
● Whether reverse stitches or reinforcement
stitches are sewn depends on the stitch that
is selected. For details, refer to “Stitch
Settings” (page 79).
1
2
5
6
4
3
1
2
ba
To Next Page
Loading...
Need help?
General
