EasyManuals Logo
Home>Brother>Sewing Machine>CS10

Brother CS10 User Manual

Brother CS10
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
49
3
Fagoting
Stitching across an open seam is called “fagoting”. It
is used on blouses and children's clothing. This stitch
is more decorative when thicker thread is used.
a
Use an iron to fold the two pieces of fabric
along their seams.
b
Baste the two pieces of fabric, separated by
about 4.0 mm (3/16 inch), onto thin paper or
a sheet of water-soluble stabilizer.
a Thin paper or water soluble stabilizer
b Basting stitching
c 4 mm (3/16 inch)
c
Attach zigzag foot “J”.
d
Select stitch or .
e
Set the stitch width to 7.0 mm (1/4 inch).
For details, refer to “Selecting stitching”
(page 27).
f
Sew with the center of the presser foot
aligned along the center of the two pieces of
fabric.
g
After sewing is finished, remove the paper.
Scallop stitching
The wave-shaped repeating pattern that looks like
shells is called “scalloping”. It is used on the collars
of blouses and to decorate the edges of
handkerchiefs.
a
Attach monogramming foot “N”.
b
Select stitch .
c
Stitch along the edge of the fabric, making
sure not to sew directly on the edge of the
fabric.
For better results, apply spray starch onto the
fabric and press with a hot iron before it is
sewn.
d
Trim along the stitches.
Be careful not to cut the stitches.
1
2
3

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother CS10 and is the answer not in the manual?

Brother CS10 Specifications

General IconGeneral
BrandBrother
ModelCS10
CategorySewing Machine
LanguageEnglish

Related product manuals