CHAPTER 8 BAR CODE CONTROL - 6
n = "s1" or "S1" 2 : 1
n = "s3" or "S3" 2.5 : 1
This parameter selects the bar code style as above. When the EAN 8, EAN 13 or UPC-A bar code mode is
selected, this bar code style parameter is ignored.
ï‚Ÿ Expanded Character shading
"S" 0 = White
1 = Black
2 = Vertical stripes
3 = Horizontal stripes
4 = Cross hatch
e.g. "S" n1 n2
n1 = Background fill pattern
n2 = Foreground fill pattern
If "S" is followed by only one parameter, the parameter is a foreground fill pattern.
To Next Page
Loading...
Need help?
General
