Brother HL-1208 User Manual

APPENDIX D REFERENCE LIST OF MX-2000/4000/5000/7000 SERIES UNIQUE COMMANDS - 7
3.1.4. PCL output tray setting
Command
Esc&l#G (27)(38)(108)#(71) <1Bh><38h><6ch>#<47h>
Parameter
# denotes the output tray.
 1:
Select the printer face-down output tray.
 3:
Select #1 bin of the Mailbox unit.
 4:
Select #2 bin of the Mailbox unit.
 5:
Select #3 bin of the Mailbox unit.
 6:
Select #4 bin of the Mailbox unit.
 7:
Select #5 bin of the Mailbox unit.
 8:
Select #6 bin of the Mailbox unit.
 9:
Select #7 bin of the Mailbox unit.
 10:
Select #8 bin of the Mailbox unit.
 11:
Select #9 bin of the Mailbox unit.
 12:
Select #10 bin of the Mailbox unit.
Default = 1
<HL-L6300/L6400>
HL-L6300/L6400 series do not support this command.
Explanation
 This command selects the specified output tray, trays defined as Mailboxes are numbered from the bottom of
the unit upwards
 This command is ignored when the specified tray is not available.
 The PJL OUTBIN command is ignored when this command is executed.
 Refer to the Technical Reference Guide Section 4.1.2 'Output tray' in Chapter 2 'PCL'.
3.1.5. PS output tray & mode setting
Command
<HL-2060>
# setoutputmode
<HL-2460/3260/7050>
<HL-L6300/L6400>
<</BROutbinMode #>> setpagedevice
Parameter
<HL-2060>
<HL-2460/3260/7050>
#
 0:
Select the printer face-down output tray.
 1:
Select the stacker function.
 2:
Select the sorter function.
 4~10:
Select the printer face-down output tray.
 11:
Select #1 bin of the Mailbox unit.
 12:
Select #2 bin of the Mailbox unit.
 13:
Select #3 bin of the Mailbox unit.
 14:
Select #4 bin of the Mailbox unit.
 15
Select #5 bin of the Mailbox unit.
 16:
Select #6 bin of the Mailbox unit.
 17:
Select #7 bin of the Mailbox unit.
 18:
Select #8 bin of the Mailbox unit.
 19:
Select #9 bin of the Mailbox unit.
 20:
Select #10 bin of the Mailbox unit.

Brother HL-1208 Specifications

General

Brand	Brother
Model	HL-1208
Category	Printer
Language	English