GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
28
Upper Threading
In this section, the procedures for positioning the spool for the upper thread and threading the needle are
described.
z The order that the machine should be
threaded is indicated by a solid line on the
sewing machine. Be sure to thread the
machine as indicated.
Threading the upper thread
Set the spool of thread on the spool pin, and then
thread the machine.
a
Turn off the sewing machine.
b
Raise the presser foot lever.
a Presser foot lever
c
Turn on the sewing machine.
a Spool pin
b Mark on handwheel
● When threading the upper thread,
carefully follow the instructions. If the
upper threading is not correct, the thread
may become tangled and the needle may
bend or break.
● The needle threader can be used with
sewing machine needles 75/11 through
100/16.
● Use appropriate thread and needle
combinations. For details on appropriate
needle and thread combinations, refer to
“Needle types and their uses” (page 38).
● Thread with a thickness of 130/20 or
thicker cannot be used with the needle
threader.
● The needle threader cannot be used with
the wing needle or the twin needle.
● If the needle threader cannot be used,
refer to “Threading the needle manually
(without using the needle threader)”
(page 33).
● If the presser foot is not raised, the sewing
machine cannot be threaded.
To Next Page
Loading...
Need help?
General
