EasyManuals Logo
Home>Brother>All in One Printer>MFC-8860DN

Brother MFC-8860DN Service Manual

Brother MFC-8860DN
492 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #373 background imageLoading...
Page #373 background image
Confidential
9-50
9.2.4.6 Network problem
If the error related to network occurs, refer to the following sections;
[ 1 ] Installation problem
The Brother print server is not found during setup of the network machine software
installation or from the printer driver of the Brother machine in Windows
®
.
The Brother print server is not found using the Simple Network Configuration capabilities of
Mac OS
®
X.
Make sure you have completed the IP address setting of the Brother print server according to
Chapter 2 of this User’s Guide before installing the network print software or printer driver.
Check the following:
1. Make sure that the machine is powered on, is on-line and ready to print.
2. Check to see if there is any LED activity. Brother print servers have two LEDs on the back
panel of the machine.
Fig. 9-9
Both LEDs are off: the print server is not connected to the network.
The upper LED is on: Link status
The upper LED is blinking: Activity status
The lower side LED is on: Link speed is 100M.
The lower side LED is off: Link speed is 10M.
3. Print the Machine Settings Page and check if the settings such as IP address settings are
correct for your network. The problem may be the result of mismatched or duplicate IP
address. Verify that the IP address is correctly loaded into the print server. And make sure
that no other nodes on the network have this IP address. For information on how to print
the Machine Settings Page, see Printing the Machine Settings Page.
4. Verify that the print server is on your network as follows:
For Windows
®
Try pinging the print server from the host operating system command prompt with the
command:
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can take
up to two minutes for the print server to load its IP address after setting the IP address).
N
etwork status LEDs (Light emitting diodes)
(MFC-8460N/8860DN/8870DW, DCP-8065DN)

Table of Contents

Other manuals for Brother MFC-8860DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-8860DN and is the answer not in the manual?

Brother MFC-8860DN Specifications

General IconGeneral
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)28 ppm
Scan toe-mail, file, image, OCR
Grayscale levels256
Input color depth48 bit
Copier resize25 - 400 %
Maximum copy resolution1200 x 600 DPI
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)28 cpm
FaxingMono faxing
Fax memory500 pages
Modem speed33.6 Kbit/s
Fax speed dialing (max numbers)300
Total input capacity250 sheets
Total output capacity150 sheets
Auto document feeder (ADF) input capacity50 sheets
Maximum internal memory544 MB
Sound power level (standby)30 dB
Sound pressure level (printing)55 dB
DisplayLCD
Market positioningBusiness
Paper tray media typesEnvelopes, Plain paper, Recycled paper
Non-ISO print media sizesExecutive
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Font styles66 Scaleable fonts, Letter, Gothic 16.66, OCR-A, OCR-B, 11 Barcodes
Dimensions (WxDxH)531 x 450 x 475 mm
Networking features10/100 Base-TX
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionsscan, n
Compatible operating systemsWindows98(SE)/Me/2000/XP/NT4.0WS Mac OS 9.1-9.2/ OS X 10.2.4 +
Standard interfacesUSB 2.0
Power consumption (standby)85 W
Power consumption (PowerSave)15 W
Power consumption (average operating)1104 W
Sustainability certificatesENERGY STAR

Related product manuals