Troubleshooting and Routine Maintenance
123
B
c Lift the paper tray cover and remove
anything that is stuck inside the paper
tray.
d Wipe the inside and outside of the paper
tray with a dry, lint-free soft cloth to
remove dust.
e Close the output paper tray and put the
paper tray firmly back in the machine.
Cleaning the scanner glass B
a Lift the document cover (1). Clean the
scanner glass (2) and the white
plastic (3) with a soft lint-free cloth
moistened with a non-flammable glass
cleaner.
b (MFC-295CN only)
In the ADF unit, clean the white bar (1)
and the glass strip (2) with a soft,
lint-free cloth moistened with a
non-flammable glass cleaner.
Note
In addition to cleaning the scanner glass
and glass strip with a non-flammable glass
cleaner, run your finger tip over the
scanner glass and glass strip to see if you
can feel anything on it. If you feel dirt or
debris, clean the scanner glass and glass
strip again concentrating on that area. You
may need to repeat the cleaning process
three or four times. To test, make a copy
after each cleaning attempt.
2
1
3
1
2
To Next Page
Loading...
Need help?
General
