Brother MFC MFC-295CN User Manual

Chapter 11
74
Date Print 11
You can print the date if it is already in the
data on your photo. The date will be printed
on the lower right corner. If the data doesn’t
have the date information, you cannot use
this function.
a Press Menu, 4, 9.
b Press a or b to choose On (or Off).
Press OK.
c Press Stop/Exit.
Note
The DPOF setting on your camera must
be turned off to use the Date Print.
Scan to a memory card
or USB Flash memory
drive
11
You can scan monochrome and colour
documents onto a memory card or USB Flash
memory drive. Monochrome documents will
be stored in PDF (*.PDF) or TIFF (*.TIF) file
formats. Colour documents may be stored in
PDF (*.PDF) or JPEG (*.JPG) file formats.
The default setting is Color 150 dpi and
the default file format is PDF. The machine
automatically creates file names based on
the current date. (For details, see the Quick
Setup Guide.) For example, the fifth image
scanned on July 1, 2009 would be named
01070905.PDF. You can change the colour
and quality.
a Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while
Photo Capture is blinking to avoid
damaging the card, USB Flash memory
drive or the data stored on them.
b Load your document.
c Press (Scan).
d Press a or b to choose
Scan to Media.
Quality Selectable File
Format
Color 150 dpi PDF / JPEG
Color 300 dpi PDF / JPEG
Color 600 dpi PDF / JPEG
B/W 200x100 dpi TIFF / PDF
B/W 200 dpi TIFF / PDF

Brother MFC MFC-295CN Specifications

General

Brand	Brother
Model	MFC MFC-295CN
Category	All in One Printer
Language	English