Page 52
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
BREW COUNTERS
This function allows the operator to track the total num-
ber of brew cycles completed, as well as the number of
batches brewed using each of the brew buttons. There
are three resettable counters, and one life counter that
is not resettable.
Procedure to view/reset the brew counters:
1. Press and hold the right hidden button until the dis-
play reads SET LANGUAGE. Press the right hidden
button until the display reads BREW COUNTERS.
2. Pressing NO will advance to the next programming
function, RECIPE TEMP. Press YES to view the fi rst
brew counter (TOTAL LIFE BREWS). This number
represents the total number of brew cycles this
brewer has completed. This counter is non-reset-
table. Press NEXT to advance to the next brew
counter, BREW A.
3. This counter represents the number of brews for
Brew A. To reset the counter to zero, press and
release RESET. Press and release NEXT to advance
to the next counter.
4. Repeat step 3 for the remaining two counters, BREW
B and BREW C.
5. When fi nished, press NEXT to advance to the next
programming function, SET RECIPE TEMPS. To
exit programming, press and release the ON/OFF
button to return to the MAIN SCREEN.
P2881
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
BREW COUNTERS?
NO YES
TOTAL LIFE BREWS
XXXX NEXT
BREW A XXXX
NEXT RESET
BREW B XXXX
NEXT RESET
BREW C XXXX
NEXT RESET
SET RECIPE TEMPS
NO YES
PRESSING NO WILL
ADVANCE TO
RECIPE TEMPS
BREW
A
BREW
B
BREW
C
36748 041504
To Next Page
Loading...
Need help?
General
