Calsense CS3000 Quick Start Guide

Calsense
6 CS3000 Quick Start Guide
5. To add the stations that share these characteristics to the Station Group, navigate to and select
Add Stations. The Add Stations screen displays (Figure 6).
Figure 6 - Add Stations screen
6. Use SELECT or +/– to add or remove stations from the Station Group.
7. When you’re done, press BACK to save the changes.
8. If additional groups are required, press BACK and navigate to and select <Add New Group> to
create additional groups and repeat steps 3-7 to define the characteristics and add stations.
9. When done, press BACK to return to the Main Menu.
Setting a Schedule
1. From the Main Menu, navigate to Scheduled Irrigation and press SELECT.
2. Navigate to and select Start Times and Water Days. The Start Times and Water Days screen
displays (Figure 7). The pane on the left displays the Station Groups on this controller while the
right shows the settings for each.
Figure 7 - Start Times and Water Days screen

Calsense CS3000 Specifications

General

Brand	Calsense
Model	CS3000
Category	Controller
Language	English