CAME GARD PX Series User Manual

p. 31 - Manual FA01313-EN - 02/2019 - © CAME S.p.A. - The contents of this manual may change, at any time, and without notice. - Original instructions
Getting started
Once the electrical connections have been completed, proceed with commissioning. Only skilled and qualified staff may perform this operation.
Make sure that the way is clear from any obstacle.
Power up the system and follow the wizard that appears on the display.
After powering up the system, the first maneuver is always the opening; wait for the maneuver to be completed.
Immediately press the STOP button if any suspicious malfunctions, noises or vibrations occur in the system.
At the end of commissioning, check the correct operation of the device using the buttons near the display. Check that the accessories also work correctly.
Export / import data
1 Insert a USB flash drive into the USB port
2 Press the Enter button to access the programming.
Red LED on
= USB memory stick recognized.
3 Use the arrows to choose the desired function.
The functions are displayed only when a USB memory stick is inserted.
- Saving data
It saves user data, timings and configurations to the memory device (memory
roll or USB key).
- Data reading
It uploads user data, timings and configurations from the memory device
(memory roll or USB key).
- Updates the FW from USB
Updated the firmware version of the device.
Make sure the USB stick contains the firmware update file.
23
1
FINAL OPERATIONS
4
3
2
1

CAME GARD PX Series Specifications

General

Brand	CAME
Model	GARD PX Series
Category	Automatic Barriers
Language	English