ENG-7
The strap is designed to hang on the neck in a specic direction. Install
the strap in a manner so that the Canon logo at the center of the strap
appears as in the illustration when the strap is hanging from the neck.
Install the eyepiece lens caps.
Install the eyepiece lens caps on the
binoculars.
Put the strap through the strap hole in
the eyepiece lens caps.
1
Fasten the strap.
Make sure that there is no slack and
the strap does not loosen at the clasp
when you pull it.
2
Connect the objective lens caps.
Use the string included in the package
to connect the objective lens caps to
the strap.
3
Installing the Strap
To Next Page
Loading...
Need help?
General
