lOADING.
liHE BATTERY
CHECKING
TME
BATTERY
This camera uses one, six-volt lithium battery pack 2CR5.
~~
~
~
! !
Battery power
sufficient
Have a new
battery
handy
Replace with new battery
(no battery
check mark)
(blinking)
Q)
Open the switch cover
and
press the battery
check
button
(~).
Battery power shows in
the display panel.
(example)
p
1)
Set the mai n switch to the
green
"0",
"A"
or "(e))" mark.
The display will come on at
this time.
If
the display does
not appear, confirm
that
the
battery
is
loaded correctly.
2)
As
shown
in
the photo, load
the battery so
that
its termi-
nals face
in
the direction
of
the camera. Make sure the
battery
is
pushed in all the
way until it
is
locked by the
orange
lever.
3)
Replace the grip securely.
• When replacing the battery,
first push the
orange
lever up.
• When using a tripod, dis-
mount the camera before re-
placing the battery.
1)
Remove the grip with a coin
or
similar object.
6
7
To Next Page
Loading...
Need help?
General
