5
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Connecting the Camera and Computer
To download to your computer images shot with your camera, you will
need to connect your camera and computer using the interface cable
provided with your camera.
1
Connect the large plug of the cable into the USB port
of your computer.
O For the location and direction of the USB port, refer to the
computer User’s Manual.
2
Connect the small plug of the cable into the terminal
on your camera.
O Once the plug is connected to the camera according to the steps
for your camera model, preparation for downloading images is
complete. Continue with “Starting up EU”.
O With the < > mark on the plug facing the back of the camera,
connect it to the camera’
s <A/V OUT / DIGIT
AL> terminal.
1D Mk IV
O With the < > mark on the plug facing the front of the camera,
connect it to the camera’s < > terminal.
Cameras other than
O With the < > mark on the plug facing the front of the camera,
connect it to the camera’
s <
> terminal or <A/V OUT /
DIGITAL> terminal.
1Ds Mk III
1D Mk III
1D Mk IV
1Ds Mk III
1D Mk III
With , you can fix the plug to the camera
with the cable protector to prevent the plug from disconnecting. For
details on using, refer to p.68, p.69.
1D Mk IV
1Ds Mk III
1D Mk III
To Next Page
Loading...
Need help?
General
Weight and Dimensions
