6
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Starting up EU
When the camera’s power switch is set to < ON >, EU will start up, and
the camera and computer will be able to communicate.
1
Set the camera’s power switch to < ON >.
¿ Communication between the camera and the computer begins
and the dialog box in step 2 is displayed.
O If the window in step 2 is not displayed even when you set the
camera’s power switch to < ON >, double-click the [EOS Utility]
icon on your desktop to start up EU.
O cannot communicate with EU if the camera’s
mode dial is set to < >. Set the mode dial to a mode other
than < >.
REBELT1i
500D
2
Click [Downloads images from EOS camera].
O In Windows XP, select [Canon EOS Utility] and then click the
[OK] button to start up EU.
O When [Always do this for this device] ([Always use this program
for this action] in Windows XP) is checkmarked, from the next
time you connect your camera and computer, EU will start when
you set your camera’s power switch to < ON >.
O The camera’s LCD monitor turns on when EU starts up.
O For cameras other than
, you can operate the camera and download images
saved on the memory card inserted in the camera to your
computer. Refer to your camera’s Instruction Manual for details.
EU Main window
¿ EU starts up, the main window
appears, and your camera and
computer can now communicate.
Continue with “Batch
Downloading Images to Your
Computer”.
1D Mk IV
7D 60D
REBELT2i
550D
To Next Page
Loading...
Need help?
General
Weight and Dimensions
