Canon FT QL User Manual

Film Loading
The Canon FT accepts any standard 35mnn film roll in
cartridge for daylight loading. When loading a new film,
always avoid direct sunlight.
1 Raise the back cover lock and make a half turn counter-
* clockwise. The cover will rise slightly,
n Open the cover fully. When the back cover is opened,
^ the QL cover opens simultaneously.
■ The QL cover automatically opens and closes with the
back cover. Do not touch the QL cover.
Q Raise the film rewind crank and pull it all the way up.
^ Face the film cartridge as illustrated, and insert it
into the cartridge compartment. Push the crank back to
its former position again. The crank fork will slip into
the axis of the film cartridge. In case the crank does
not fully return, turn it slightly to the left or right.
M Hold the film cartridge down with the left hand so
“ that it does not rise, and lay the tip of the leader
above the "red" film set mark.

Canon FT QL Specifications

General

Brand	Canon
Model	FT QL
Category	Film Camera
Language	English