Canon imagePROGRAF iPF6350 Basic Guide No.3 Basic Guide

48
Error Messages
Error Message Cause Corrective Action
The roll is empty. The roll is empty. Follow these steps to replace the used roll with a new
roll of the same type and size.
Press the OK button and remove the roll.1.
Load the new roll.2.
If no barcode was printed on the roll, specify the
type of paper.
3.
When you have selected ManageRemainRoll >
On in the control panel menu and a barcode is not
printed on the roll, also specify the paper length.
4.
(→
, Removing the Roll from the Printer)
(→"Removing Rolls from the Roll Holder," User
Manual)
(→ , Loading Rolls on the Roll Holder)
(→
, Loading Rolls in the Printer)
(→"Specifying the Paper Length," User Manual)
(→"Changing the Type of Paper," User Manual)
If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
5.
Printing will resume, starting from the page on
which the error occurred.
There is remaining roll paper, but
because it could not be advanced,
it could not be detected.
Choose a higher level of Print Quality in the
Advanced Settings of the printer driver.
(→"Giving Priority to Particular Graphic Elements and
Colors for Printing," User Manual)
Roll printing is selected, but
manual paper is loaded.
A print job for rolls was received
when a sheet is loaded.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.
Press ▲ or ▼ to select Eject Paper , press the OK
button, and remove the sheet.
(→
, Removing Sheets)
Load a new roll.
(→ , Loading Rolls in the Printer)
Follow these steps to load and print on a roll.
The printer now starts printing the print job.
1.
2.

Canon imagePROGRAF iPF6350 Basic Guide No.3 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6350 Basic Guide No.3
Category	Printer
Language	English