Canon imagePROGRAF TM-200 Setup Guide

12
The printer connection settings and software installation are performed using a computer.
You can download the setup le from our website. If you are using a Windows PC, you can also run the le from the CD-ROM.
However, if you selected No in step 3 for Wi-Fi connection on p.11, congure the Wi-Fi settings only using the printer. Proceed to "Congure Wi-Fi Settings on
the Printer" on p.13.
4
Click Start Setup.
Congure the settings by following the instructions on the screen.
This completes the setup.
Note
• A screen for selecting the printer connection method may be displayed in the middle of conguring the settings.
If this happens, select the method you selected on p.11 and then click Next and continue with the rest of the settings.
• Connect the USB cable to the proper location.
Connecting to the Printer
Downloading and running from the website
(Windows/Mac)
1
Enter the following URL in the web
browser of your computer to access the
website.
2
Click Set Up.
Perform the remaining operations by
following the instructions on the screen.
3
Click Download to download the setup
le and then run the le.
If a warning screen about downloading
appears, select Do not block, Allow, etc.
and then proceed to the next step.
Booting up from the CD-ROM (Windows)
If you are using Windows 10 or Windows 8.1
1
Insert the setup CD-ROM into the
computer.
2
Click the popup message for the disk
drive and click Run Msetup4.exe on the
screen that is displayed.
If the message did not appear (or has disappeared)
Click or File Explorer on the
taskbar.
Click This PC on the left side of the window
that opens.
Double-click the CD-ROM icon on the
right side of the window.
If the contents of the CD-ROM appear,
double-click Msetup4.exe.
3
If the User Account Control dialog box
appears, click Yes and proceed to the
next step.
If you are using Windows 7
1
Insert the setup CD-ROM into the
computer.
2
When the AutoPlay screen appears, click
Run Msetup4.exe.
If the AutoPlay screen does not appear
Click Computer from the start menu.
Double-click the CD-ROM icon in the
right side of the window that opens.
If the contents of the CD-ROM appear,
double-click Msetup4.exe.
3
If the User Account Control dialog box
appears, click Continue and proceed to
the next step.

Canon imagePROGRAF TM-200 Specifications

General

Brand	Canon
Model	imagePROGRAF TM-200
Category	Printer
Language	English