Canon imagerunner advance C5550i Faq Manual

27
If You Cannot Send/Forward Faxes/If You Cannot Receive Faxes
If You Cannot Receive Faxes
Delete unnecessary documents in the
memory to increase the free space.
1.
Press
2.
Press [Fax/I-Fax Inbox] [Memory RX Inbox]
[Memory RX Inbox] on the touch panel display.
3.
Select unnecessary
documents.
4.
Press
5.
Press [Yes].
Find the remedy using the number
that follows the letter "#."
If sending or receiving of a fax fails, a
number following "#" (error code) is
displayed on the touch panel display or in
the communication management report.
You can find the remedy using the error
code.
Search
10H4-0JX
Countermeasures for Each Error Code
User's Guide
How to use the search number
P.43
Solution
1
Solution
2
If you are using an optical line or IP
telephone line
Communication errors may occur depending on
the line quality.
For more information, contact your telephone
carrier.
Reduce the fax transmission
speed.
Reducing the fax transmission
speed may result in a
communication error reduction.
1.
Press
2.
Press [Function Settings] [Send]
[Fax Settings] on the touch panel
display.
3.
Press [TX Start Speed].
4.
Select a slower speed than the current
one.
5.
Press
POIN T
You can also set the transmission
speed from the preferences for the
address book or one-touch buttons.
For more information
User's Guide

Canon imagerunner advance C5550i Specifications

General

Type	Color Laser Multifunction Printer
Print Resolution	1200 x 1200 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 6, 350 sheets
Hard Disk Drive	250 GB
Duplex Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	Up to 50 ppm
Copy Speed	Up to 50 ppm (Letter)
Connectivity	USB, Ethernet, Wi-Fi
Display	10.1-inch TFT LCD WSVGA Color Touch Panel
Warm-up Time	Approximately 30 seconds
Memory	4 GB RAM
Fax Resolution	Up to 400 x 400 dpi
Dimensions	620 mm x 742 mm x 932 mm (W x D x H)