Canon PIXMA G2020 Series User Manual

Cannot Communicate with Printer via USB
Check1
Make sure printer is turned on.
Check2
Connect USB cable properly.
As the illustration below, the USB port is at the back of the printer.
Important
•
Check the orientation of the "Type-B" connector and connect to the printer. For details, refer to the
instruction manual supplied with the USB cable.
Check3
Make sure Enable bidirectional support is selected in the Ports sheet of the
Printer properties dialog box. (Windows)
If not, select it to enable bidirectional support.
Opening Printer Driver's Setup Screen
303

Canon PIXMA G2020 Series Specifications

General

Print Technology	Inkjet
Print Resolution	4800 x 1200 dpi
Scanner Type	Flatbed
Scanner Resolution	600 x 1200 dpi
Dimensions	445 x 330 x 167 mm
Weight	6.4 kg
Functions	Print, Copy, Scan
Mono Print Speed	Approx. 9.1 ipm
Colour Print Speed	Approx. 5.0 ipm
Two Sided Printing	Manual operation
Multiple Copy	Up to 99 pages
Interface Type	Hi-Speed USB
Maximum Paper Input	100 sheets (plain paper)
Ink Tank System	Yes
Ink Colors	4 (Black, Cyan, Magenta, Yellow)
Power Consumption (Standby)	Approx. 0.8 W
Ink Type	Pigment Black, Dye-based
Paper Handling	Rear Tray
Connectivity	USB
Copy Speed	sFCOT: Approx. 28 sec
Photo Print Speed	Approx. 45 seconds (borderless 10x15cm)
Borderless Printing	Yes
Scanning Depth (Output)	24-bit color
Copy Functions	Document Copy, Borderless Copy
Paper Types	Plain paper, Photo paper, Envelopes
Paper Sizes	A4, A5, B5, Letter, Legal, Envelopes
Operating System Compatibility	Windows, Mac OS
Printer Type	All-in-One