Canon PIXMA G2060 Series User Manual

Print settings
Select this menu from Device settings in Setup menu.
• Prevent abrasion
Use this setting only if the print surface becomes smudged.
Important
• Be sure to set this back to OFF after printing since it may result in lower printing speed or lower
print quality.
• Amount of extension
Selects the amount of image that extends off the paper when printing in borderless (full).
When performing Borderless Printing, slight cropping may occur at the edges since the printed image is
enlarged to fill the whole page. You can change the width to be cropped from the borders of the original
image as needed.
Important
• Settings will become ineffective in the following situations:
Printing from a standard form.
Note
• When performing settings from application software or the printer driver, these settings will be
prioritized.
• If printouts contain margins even though you are printing in Borderless, specifying Amount: Large
for this setting may help solve the problem.
• Plain paper target
Select Text only or Text and photos for plain paper printing.
Note
• As print results, if you are conscious of unevenness or textures of granularity, select Text and
photos.
135

Canon PIXMA G2060 Series Specifications

General

Print Technology	Inkjet
Print Resolution	4800 x 1200 dpi
Borderless Printing	Yes
Two Sided Printing	Manual operation
Functions	Print, Copy, Scan
Scanner Type	Flatbed
Scanner Resolution	600 x 1200 dpi
Scanner Resolution (Optical)	600 x 1200 dpi
Paper Handling	Rear Tray
Maximum Paper Input	100 sheets (plain paper)
Dimensions (W x D x H)	445 x 330 x 167 mm
Ink Type	Pigment Black, Dye Color
Photo Print Speed	Approx. 45 sec
Scanning Depth (Input / Output)	48 bit / 24 bit (RGB each 16 bit / 8 bit)
Maximum Document Size	A4 / Letter (216 x 297 mm)
Copy Functions	Document Copy, Borderless Copy
Connectivity	USB
Operating Systems	Windows 10, Windows 8.1, Windows 7 SP1, macOS 10.12.6 - macOS 10.15
Paper Types	Plain Paper, Photo Paper
Paper Sizes	A4, A5, B5, LTR, LGL, 4x6", 5x7", 8x10", Envelopes (DL, COM10)