Canon PIXMA MX310 Service Manual

1-3. Fax Errors
For error other than those listed below, please refer to the “G3/G4 Facsimile Error Code List (Revision 2)
HY8-23A0-020.”
(1) User error codes
Error code
TX / RX Meaning
#001 TX Document jam
#003 TX / RX Document is too long, or page time-over
#005 TX / RX Initial identification (T0 / T1) time-over
#009 RX Recording paper jam, or no recording paper
#012 TX No recording paper at the receiving machine
#017 TX Redial time-over, but no DT detected
#018 TX Auto dialing transmission error, or redial time-over
#022 TX Call failed (no dial registration)
#037 RX Memory overflow at reception of an image
#085 TX No color fax function supported in the receiving machine
#099 TX / RX Transmission terminated mid-way by pressing the Stop/Reset button
#995 TX / RX
During TX (sending): Memory transmission reservation cancelled
During RX (receiving): Image data received in the memory cleared
(2) Service error codes
Error code TX / RX Meaning
##100 TX Re-transmission of the procedure signal has been attempted the
specified number of times, but failed.
##101 TX / RX Sender's modem speed does not match the receiving machine.
##102 TX Fallback is not available.
##103 RX EOL has not been detected for 5 seconds (or 15 seconds in CBT).
##104 TX RTN or PIN has been received.
##106 RX The procedure signal has been expected for 6 seconds, but not
received.
##107 RX Fallback is not available at the sending machine.
##109 TX After DCS transmission, a signal other than DIS, DTC, FTT, CFR, or
CRP has been received, and re-transmission of the procedure signal
has been attempted the specified number of times but failed.
##111 TX / RX Memory error
##114 RX RTN has been received.
##200 RX A carrier has not been detected for 5 seconds during image
reception.
##201 TX / RX DCN has been received in a method other than the binary procedure.
##204 TX DTC has been received even when there is no sending data.
(6/32)

Canon PIXMA MX310 Specifications

General

DVD/CD printing	No
Print technology	Inkjet
Maximum resolution	4800 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	22 ppm
Print speed (color, normal quality, A4/US Letter)	17 ppm
Number of print cartridges	4
Scanner type	Flatbed scanner
Input color depth	48 bit
Maximum scan area	216 x 297 mm
Optical scanning resolution	1200 x 2400 DPI
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	22 cpm
Copy speed (color, normal quality, A4)	17 cpm
Faxing	Color faxing
Fax coding methods	MH, MR
Error Correction Mode (ECM)	Yes
Maximum input capacity	100 sheets
Auto document feeder (ADF) input capacity	30 sheets
Envelopes sizes	DL
Media weight (tray 1)	64 - 105 g/m²
Paper tray media types	Envelopes, Glossy paper, Photo paper, Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4, A5
ISO B-series sizes (B0...B9)	B5
Borderless printing media sizes	A4
Minimum system requirements	CD-ROM / 1024x768
Sound pressure level (printing)	40 dB
Dimensions (WxDxH)	465 x 440 x 230 mm
Power requirements	AC 100-240V, 50/60Hz
All-in-one functions	Copy, Fax, Scan
Color all-in-one functions	copy, fax, print
Compatible operating systems	Windows Vista / Windows XP SP1, SP2 / Windows 2000 Professional SP2, SP3, SP4 Mac OS X v.10.2.8 - v.10.4
Minimum RAM	128 MB
Minimum processor	Pentium II 300 MHz/PowerPC G3
Minimum storage drive space	800 MB
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Power consumption (off)	1.1 W
Power consumption (standby)	1.8 W
Power consumption (average operating)	16 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 90 %
Market positioning	Home & office