8
1.
Press the power button.
The start-up sound will play and the start-
up image will display in the LCD monitor.
• Pressing the power button again turns
the power off.
• Pressing the power button while
pressing and holding the DISP. button
will turn on the mute setting which will
mute all sounds except for warning
sounds.
2.
Set the mode switch to (shooting)
(
).
3.
Set the shooting mode dial to
(
)
.
4.
Aim the camera at the subject.
5.
Focus and shoot.
1. Press the shutter button halfway to
focus.
When the camera focuses, the camera
beeps twice and the indicator lights
green (orange when using the flash).
Also, the AF frame appears in green on
the LCD monitor at the point where the
camera is focused.
Shooting
Î See the Advanced Guide: Using the LCD Monitor (p. 12).
Î See the Advanced Guide: Power Saving Function (p. 17).
Î See the Advanced Guide: Set up Menu (p. 22).
Î See the Advanced Guide: My Camera Menu (p. 24).
Power button
DISP. button
Indicators
To Next Page
Loading...
Need help?
General
