Shooting in Smart Auto Mode
57
Still Images/Movies
• To activate the screen when the camera is on but the screen is blank,
press the l button.
• To restore camera sound if you have accidentally deactivated it (by
holding the l button down while turning the camera on), press
the n button and choose [Mute] on the 3 tab, and then press
the qr buttons to choose [Off].
• The camera makes a slight noise if shaken, but this is the sound of
the lens moving and does not indicate mechanical damage.
Still Images
• A flashing icon warns that images are more likely to be blurred
by camera shake. In this case, mount the camera on a tripod or take
other measures to keep it still.
• If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see “Specifications” in the
Getting Started guide.
• The subject may be too close if the camera only beeps once when
you press the shutter button halfway. For details on the focusing
range (shooting range), see “Specifications” in the Getting Started
guide.
• To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
• A blinking h icon displayed when you attempt to shoot indicates that
shooting is not possible until the flash has finished recharging.
Shooting can resume as soon as the flash is ready, so either press
the shutter button all the way down and wait, or release it and press
it again.
• Restart the camera if the message [Wrong flash position. Restart the
camera] displayed, which indicates that your finger or some other
object is obstructing the movement of the flash.
• The flash firing during shots indicates that the camera has automatically
attempted to ensure optimal colors in the main subject and background (Multi-
area White Balance).
• The shutter sound will not be played when the Sleeping and Babies (Sleeping)
icons (p. 59) are displayed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
