8. Learning to Hold the Camera Correctly
Loading the Film in Low or
Humid Temperatures
In low temperatures, film with a
long leader may become curled.
Manually wind the excess leader
back into the cartridge to
straighten out the curl. Then pull
the film back out and align its tip
with the orange index.
When the humidity is high, film
becomes soft and easily torn.
Keep the film stored in its
canister until just before you load
it to keep it from tearing.
The slightest movement of your
body during shutter release may
cause blur in the picture. The
best way to prevent camera
movement is to hold the camera
firmly, with your left hand sup-
porting the camera and lens.
Press your left elbow to your body
and lightly press the camera
against your cheek or forehead.
For a vertical shot, steady at least
one elbow against your body
Spread your feet slightly apart,
one foot ahead of the other, and
relax.
1. Lean against a steady support
like a tree, a wall, or a table, if
available. This way your
pictures will be just that much
sharper.
2. There is, of course, no one cor-
rect way to hold the camera
Experiment to find the most
suitable way for you. Select a
method that provides comfort in
addition to stability. It may help
to practice in front of a mirror.
Take care not to touch the rewind
knob and button when taking
vertical shots.
To Next Page
Loading...
Need help?
General
