Reconfiguration Method of LAN Connection/Reconfiguration
Method of Wi-Fi Connection
Reconfiguration Method of LAN Connection
Reconfiguration Method of Wi-Fi Connection
Reconfiguration Method of LAN Connection
Follow either procedure below to change LAN connection method (wired or Wi-Fi).
• For Windows:
â—¦ Redo setup using the Setup CD-ROM or from the web page.
â—¦ Enable Wi-Fi or wired LAN on the operation panel of the printer. After that, perform settings on the
Network Settings screen on IJ Network Device Setup Utility.
For details, refer to Performing/Changing Wi-Fi Settings or Performing/Changing Wired LAN
Connection (Ethernet Cable) Settings.
• For macOS:
â—¦ Redo setup from the web page.
Reconfiguration Method of Wi-Fi Connection
Follow either procedure below to change Wi-Fi connection method (infrastructure or Wireless Direct).
• For Windows:
â—¦ Redo setup using the Setup CD-ROM or from the web page.
â—¦ Perform settings on the Network Settings screen on IJ Network Device Setup Utility.
Important
• Before you perform settings using IJ Network Device Setup Utility, turn on Easy wireless
connect mode on the printer following the procedure below.
1.
Check that printer is turned on.
2. Press and hold Wireless connect button for 3 seconds.
LCD and Operation Panel
3. Perform operations following instructions on your smartphone or tablet.
4. If message saying setup is completed appears, press OK button.
• For macOS:
Redo setup from the web page.
61
To Next Page
Loading...
Need help?
General
