E9
Panning center
180°
217
φ
Panning range
Tilting center
220
40°
220°
φ
4. Operation
4-1. Operation Precautions
CAUTION
Do not move the parts used for panning and tilting manually. This may damage the unit.
NOTE
The range may be off by 10% or so due to variations in the magnication caused by focusing and
the pan-tilt head mounting error. Check the actual panning range before proceeding to set to the
subject.
4-1-1. Panning Range
The panning range extends 180° to the left
and right.
A turning range of approx. 217 mm (270
mm with options installed) in diameter
should therefore be taken into account
when selecting the installation location.
4-1-2. Tilting Range
Similarly, the tilting range is approx. 220
mm (230 mm with options installed) when
the pan-tilt head is inclined upward at
220° and downward at an 40° (or when
suspended, upward at 40° and downward
at 220°).
Also take this into account when selecting
the installation location.
To Next Page
Loading...
Need help?
General
