82
Converting Analog Signals into Digital
Signals (Analog-Digital Converter)
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog
video/audio signals to digital signals and output the digital signals via the DV terminal.
The DV terminal serves as output terminal only.
Connecting the Devices
Turn off all devices before starting the connections. Unload the tape from the camcorder.
Refer also to the instruction manual of the connected device.
Turning On the Analog-Digital Converter
Open the menu and select [VCR SETUP]. Select [AV DV], set it to [ON]
and close the menu.
CAMERA
PLAY (VCR)
CARD CAMERA CARD PLAY
MENU
(37)
VCR SETUP AV DV
••••••••
OFF
AUDIO
VIDEO
R
L
Signal flow
Commercially available DV cable
Signal flow
STV-250N Stereo Video
Cable (supplied)
To Next Page
Loading...
Need help?
General