12
ENHANCED COPPER TUBI NG
Enhanced copper tubing is more efficient and durable
and can be rep ai red in the fi el d, i f req ui red . B ecaus e
copper is a very stable metal, it is durable and resists
corrosion. Enhanced copper tubing increases:
S heat transfer capability
S the efficiency of the cooling and heating
processes
S thermal conductivity (by creating additional
tube surface and turbulent refrigerant gas
flow)
Every Carrier PTAC coil undergoes thorough leak
testing and pressure testing.
SEAMLESS BASEPAN
Seam l es s drawn basepan wall s add p rot ect i o n agains t
water accum u l at i on resu lting from storm --driven rain
with heavy wind.
Carrier ’s deep basepan holds up to 1 -- 3/4 gallons of
water without spilling. Closed cell foam insulators
are lo cat ed b et ween the bas ep an and coi l s, k eep i ng
coil s fro m d i rect co nt act wit h th e basep an and
providing additional protection against corrosion.
A07552
CONDENSATE DRAIN VALVE
The tem perat u re --acti vat ed drai n val ve open s when
the outdoor temperature drops below 55_F to prevent
water from freezin g i n t he b asep an .
A07550
Condensate Dr ai n Val ve P revent s Water
fro m Fr eezi ng in Basepan
CONDENSATE REMOVAL
Carrier’s 52M S eries unit has a new condensate
(water) disposal system. In addition to slinger ring
technology, Carrier has developed and patented a
Condensate Suction P ort. The suction port, along
with the slinger ring, draws in water which is sprayed
up onto the outdoor coil. The water then evaporates,
thus providing better disposal of excess condensate
and improving unit efficiency.
NOTE: If it is necessary to control 100% of the
condensate, the Carrier Drain Kit (Part No.:
DRAIN--KIT--4PK) is recommended.
SLINGER
RING
CONDENSER SECTION
CONDENSATION
SUCTION PORT
A07678
Condensate Removal System
52M
To Next Page
Loading...
Need help?
General
