`
6
Precautions
- Please do not install the product at a place with drastic temperature changes such as on the
side of a window or a door.
- Avoid a place adjacent to an operating air conditioner or heater.
- Avoid a place with occurrence of vibration, rotation or excessive electromagnetic waves.
- Avoid a top of unstable surfaces.
- Avoid a dusty place.
- Do not use the product at a place with an exposure to direct sun light.
- Do not install in a region with magnetism or adjacent to machines.
1) Level adjustment for the balance
For balance, a level instrument is mounted on the rear of right side along with four level
adjusting screws. Please make the adjustment of the level adjusting screws so that an air
bubble of the level instrument is positioned inside a circle at the center.
2) How to operate a power supply for the balance
When a power supply for the balance is turned on and off, a “Power supply” key shall be used,
and nothing shall be allowed to be placed on a platter.
This balance has a chargeable battery built in. When the “power supply” key is clicked after
supplying power to the balance, it will become a weighing condition after undergoing its own
test from 9 to 0. Particularly, make sure to sufficiently charge the battery for more than two
hours before use.
A battery service time after complete charging is about 100 hours. When the service time is
short even after complete charging of the purchased balance, use repeated charging and
discharging for several times to recover a service time performance.
Please use the product correctly by reading the present manual carefully prior to use to
sufficiently utilize the features of the PR-C series.
PR-C series precautions
※ Protect bolt (1ea) fixed to Product from the beginning.
※ please remove the Protect bolt before use.
To Next Page
Loading...
Need help?
General
