Cascade F Series User Manual

208743 Rev. 1
NSTALLATION
I
8
FP0727.eps
Lower Bearings
Fork
Bars
Lubricate
full length
Grease fittings
Lubrication Points – 100 hours
12
IMPORTANT: Prelubed at factory. Lube not
necessary for installation.
• Lubricate the grease fittings (sideshift to
access) and lower bearings every 100 hours
with chassis grease.
• Lubricate the shaded areas on the fork bars
with Slip Plate (Slix It) No. 8035 lubricant–
Cascade part no. 599489.
FP0100.eps
FP0101.eps
OK
Lower Hook/Carriage Clearance
Repair or
Replace
13
Inspect Forks and Upper Carriage
Bar – 500 hours
Use wear gauge part no. 209508 (ITA Class II) or
209507 (ITA Class III) to inspect for carriage bar and
fork hook wear every 500 hours of operation.
• Inspect for excessive clearance between the
lower hooks and carriage bar. If the gauge fits
between the carriage bar and lower hook, repair or
replacement is needed.
• Inspect the upper carriage bar. If the gauge arrow
touches the carriage bar, repair or replacement is
needed.
• Inspect the fork upper hooks. If the gauge arrow
touches the hook, repair or replacement is needed.
FP0102.eps
Fork Upper Hooks
OK
Repair or
Replace
Upper Carriage Bar
OK
Repair or
Replace

Cascade F Series Specifications

General

Brand	Cascade
Model	F Series
Category	Forklifts
Language	English