Cascade K Series User Manual

3
6055911-R8 EN
PERATION
O
Safety Rules – Handling Loads
SIDESHIFTING /
FORK POSITIONING
A Sideshift Left
B Sideshift Right
C Open Forks
D Close forks
FP0174.eps
Limit truck movement
with raised load.
Top of load
should not extend
above backrest.
Load weight must not exceed
combined truck/attachment
capacity (see truck nameplate).
Total fork capacity (LH + RH fork)
must be greater than load weight.
Check capacity stamp on forks.
CAUTION: Do not put
side loads on forks.
Center load
prior to
traveling.
Limit sideshifting
with raised load.
LOAD
WEIGHT
B
D
C
A
GA0005.eps
Hoist down
Tilt forward
Hoist up Tilt Back
AUXILIARY VALVE
FUNCTIONS
Fork Positioner/Sideshifter Operation
Raise load prior
to sideshifting.
FP0696.eps
B
C
SIDESHIFTING / FORK
POSITIONING WITH
SOLENOID VALVE
A Sideshift Left
A Open Forks
(press knob button)
B Sideshift Right
B Close Forks
(press knob button)
A
C
D
FP0696.eps
B
A
A
A
B
B
D
WARNING: Truck control handle and attachment function
activation shown here conforms to ISO 3691 ANSI/ITSDF
B56.1 recommended practices. Failure to follow these
practices may lead to serious bodily injury or property
damage. End user, dealer and OEMs should review any
deviation from the practices for safe operation.

Cascade K Series Specifications

General

Brand	Cascade
Model	K Series
Category	Forklifts
Language	English