3
CONTROL PANEL
ECON
LOW
MED
HIGH
POWER Turns Fan On/O
SPEED SELECTION
Allows four dierent speed selections
OSCILLATION
Activates the tower fan’s oscillation motor which
slowly turns the tower fan from side to side. A blue
LED light will appear directly above the button
when the oscillation motor is on.
WIND SELECTION Activates dierent fan modes.
A blue LED light will appear above the button to
show which mode the fan is in.
Fan modes include:
Descriptions of the various modes are featured in
the MODE EXPLANATION section below.
TIMER Activates a timer that will turn the
fan OFF after a certain amount of time.
The blue LED lights above the timer button
on the control panel indicate hourly
increments that can be added together for
a total of 15 hours. For example: if there is a
blue LED light above the 1h icon and above
the 4h icon, the fan will turn o after 5
hours. The fan will turn o automatically
only if the timer is activated.
MODE EXPLANATION
ECON
ECON
LOW
MED
HIGH
STANDARD WIND
The Standard Wind mode is simply the ECON,
LOW, MED, and HIGH speed settings
EVENING WIND
The air flows as an evening breeze which
gradually decreases to a light night breeze.
The four dierent Evening Wind modes are
shown below:
ECON Evening Wind
The air flow remains at ECON
LOW Evening Wind
The air flow begins at LOW, after half
an hour it will drop down to ECON
MED Evening Wind
The air flow begins at MED, after half
an hour it will drop down to LOW,
after an additional half an hour it will
drop down to ECON
HIGH Evening Wind
The air flow begins at HIGH, after half
an hour it will drop down to MED, after
an additional half an hour it will drop
down to LOW, after an additional half
an hour it will drop down to ECON
BREEZE WIND
Automatically selects wind speed randomly
as you would find outdoors.
The speeds are detailed as follows:
ECON Breeze Wind
The wind settings will fluctuate
between MED, LOW and ECON in an
80 second wind cycle that repeats
with ECON being the most common
LOW Breeze Wind
The wind settings will fluctuate
between MED, LOW and ECON in an
80 second wind cycle that repeats
with LOW being the most common
MED Breeze Wind
The wind settings will fluctuate
between HIGH, MED, LOW and
ECON in an 80 second wind cycle
that repeats with MED being the
most common
HIGH Breeze Wind
The wind settings will fluctuate
between HIGH, MED, LOW and
ECON in an 80 second wind cycle
that repeats with HIGH being the
most common
■ WARNING: To reduce the risk of electric shock,
DO NOT use this fan with any solid-state speed
control and DO NOT insert finger or any object
into grill.
■ POLARIZED PLUG: This appliance has a
polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If
the plug does not fit fully into the outlet, reverse the
plug and try again. It if still does not fit, contact a
qualified electrician. DO NOT attempt to change this
safety feature.
CLEANING AND STORAGE
■ To clean your fan, first turn it OFF and UNPLUG the unit.
■ Use a soft cloth to wipe the housing. DO NOT use water or any other chemical solution or cleaner. DO NOT
soak or immerse the fan in water or liquid.
■ DO NOT ATTEMPT TO TAKE THE FAN APART.
■ Store in a dry place away from excessive heat and direct sunlight.
■ Regular cleaning will ensure optimum performance and appearance of the fan.
■ DO NOT kink the power cord when storing or while in use.
USER SERVICING INSTRUCTIONS
A.
To d is co n ne ct , gra sp t he p lu g a nd p ul l it f ro m t he wa ll o ut le t. DO N OT un pl ug by p ul li n g th e co rd .
B.
Open fuse cover. Slide open the fuse access cover located on the top of the plug towards to plug blades.
C.
Remove the fuse by turning the fuse over (end over end) carefully making sure not to break the fuse. (See Fig. 2)
D.
Risk of fire. Replace fuse only with 2.5A, 125V fuse.
E.
Close fuse cover. Slide close the fuse access cover toward the fan cord on the top of the plug.
NOTICE:
1.
When you replace the fuse, DO NOT force the slide suddenly or overexert to reduce the risk of damage.
2.
If you experience diculty replacing the fuse, contact a qualified electrician to help.
3.
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard
product if the attachment plug is damaged.
4.
WARNING: To R ed uce Th e Ri s k Of F ire O r El ec tr ic Sh oc k, D o No t Us e Th is Fa n Wi th A ny S ol id -S ta te Sp ee d
Control Device.
5.
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If
the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow
product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may
be present and the product should be discarded or returned to an authorized service facility for examination
and/or repair.
6.
Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for
examination and/or repair.
7.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route
cord under furniture or appliances. Arrange cord away from trac area and where it will not be tripped over.
8.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
Standard Wind Evening Wind Breeze Wind
ECON
ECON
LOW
MED
HIGH
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
SPARE FUSE
2.5 A MAX
FUS E
To Next Page
Loading...
Need help?
General
