4
Step 1
Your tower fan base is composed of two pieces (BASE
FRONT and BASE BACK). The base needs to be
connected together prior to attaching it to the tower
fan. Align, and then insert, the plastic pegs of the BASE
TOP with the holes on the BASE BOTTOM until both
pieces snap together.
PARTS LIST
Step 3
Next, align the base mount guide peg with the guide
hole located on the base. The base will only fit onto the
tower fan one way. Once the base is properly aligned
on the bottom of the tower fan, insert and tighten the
4 screws to secure the base to the tower fan.
A) Fan Body
D) 4X Fan Screws
E) Remote Control
B) Base Front C) Base Back
ASSEMBLY
To Next Page
Loading...
Need help?
General
