Casio 5450 User Manual

See “Confi during Current Time and Date Settings” (page E-17).
The watch is now ready for use.
Mode Reference Guide
Your watch has 7 “modes”. The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
•View the current time and date in the Home City
•Configure Home City and daylight saving time (DST) settings
•Configure time and date settings
Timekeeping Mode E-13
View the barometric pressure and temperature at your current location Barometer/ Thermometer Mode E-23
•View the altitude at your current location
•Determine the altitude differential between two locations (reference point and current location)
Altimeter Mode E-30
View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-42
Use the stopwatch to measure elapsed time Stopwatch Mode E-44
Use the countdown timer Countdown Timer Mode E-46
Set an alarm time Alarm Mode E-49
Selecting a Mode
The illustration below shows which buttons you need to press to navigate between modes.
In any mode (except when a setting screen, with fl ashing digits, is on the display), press B to illuminate the display.
CASIO Watch 5450 - Selecting a Mode
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Auto Return Features
The watch returns to the Timekeeping Mode automatically if you do not perform any button operation for two or three minutes in the Alarm Mode.
The watch will return to the Timekeeping Mode automatically if you do not perform any operation for about one hour after entering the Barometer/Thermometer Mode.
If you leave a setting screen with fl ashing digits on the display for two or three minutes without performing any operation, the watch exits the setting screen automatically.
Initial Screens
When you enter the World Time Mode or Alarm Mode, the data you were viewing when you last exited the mode appears fi rst.
Scrolling
The B and D buttons are used on the setting screen to scroll through data on the display. In most cases, holding down these buttons during a scroll operation scrolls through the data at
high speed.
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
In the Timekeeping Mode, the graphic in the center of the display indicates the passage of seconds.
CASIO Watch 5450 - Timekeeping
Confiduring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting either standard time or daylight saving time (DST).
To configure Home City settings
1. In the Timekeeping Mode, hold down A until the currently selected city code (Home City) starts to fl ash. This is the city code setting screen.
• Before the city code starts to fl ash, the message SET Hold will appear on the display. Keep A depressed until SET Hold disappears and the city code starts to fl ash.
• For details about city codes, see the “City Code Table” at the back of this manual.

Casio 5450 Specifications

General

Brand	Casio
Model	5450
Category	Watch
Language	English