Casio 5582 User Manual

Example: Recording a Race
Lap Time
This section explains how to record lap times
while watching a race. It also shows how you
can view lap times with CASIO WATCHES
after the race is over.
l
Lap Times
During a race
Measure lap times.
1.
X
Hold down (D) for at least two seconds.
This will cause the watch to enter the
Timekeeping Mode.
2.
X
Press (D) once.
This will cause the watch to enter the
Stopwatch Mode.
Minutes, seconds
1/1000 seconds
Speed
3.
X
Use the operations below to measure
lap times.
E
E
E
A
Stop
Start
Pressing (E) at the end of each lap will
record each lap time in watch memory.
●
Lap times are recorded in 1/1000-
second units during the first hour of an
elapsed time measurement session.
After one hour, times are recorded in
1/10-second units.
4.
X
Press (A) to reset the stopwatch time to
all zeros.
5.
X
Hold down (D) for at least two seconds
to return to the Timekeeping Mode.
After a race
After the race is finished, you can view the
measured lap times with CASIO WATCHES.
l
Sending Stopwatch Data to a Phone
l
Checking a Lap Time
Viewing Measured Data
Records
You can use the procedure below to view lap
time records.
1. Enter the Recall Mode.
l
Navigating Between Modes
2. Use (E) to cycle through lap numbers.
●
Each press of (E) advances
sequentially through the lap numbers
from [001] to [200].
E
E
E
E
Lap number
3. Press (A) to display the lap time of the
currently displayed lap number.
Note
●
Lap time records in watch memory are
lap time measurements taken during a
single stopwatch elapsed time
measurement session (start of time
measurement from all zeros, up to the
point stopwatch time is reset to all
zeros). Records are assigned
numbers in the sequence the lap time
measurements are performed.
Operation Guide 5582
10

Casio 5582 Specifications

General

Brand	Casio
Model	5582
Category	Watch
Language	English