Setting the Time and Day
While the watch is connected to a phone, it will
automatically correct its day and time settings
to those of the phone. If the watch is not
connected to a phone, use the procedure
below to adjust its day and time settings.
1. Pull out the crown to the second click.
This causes the second hand to move to
“A” of the watch’s current time setting is
a.m., or “P” if it is p.m., and enables the
hour and minute setting operation.
2. Rotate the crown to adjust the hour and
minute settings.
●
Adjusting the time in the Timekeeping
Mode also causes the Dual Time setting
to change. Crown operation is disabled
while the small hour and minute hands
are moving.
3. Press (A).
This enables the month and day setting
operation.
4. Press (B) to change the month.
30
1
11
5
7
2
10
48
39
DayMonth
12
6
5. Rotate the crown to change the day.
6. Press (A).
This enables the year 10’s digit setting
operation.
7. Rotate the crown to change the year 10’s
digit.
30
00
60
10
5070
20
4080
90
Year (10’s digit)
8. Press (A).
This enables the year one’s digit setting
operation.
9. Rotate the crown to change the year one’s
digit.
3
0
6
1
57
2
48
9
Year (one’s digit)
10. On a time signal at the top of a minute,
push the crown back in.
Note
●
The day of the week is set
automatically in accordance with the
year, month, and day settings.
Dual Time
Dual Time lets you keep track of the current
time in another time zone in addition your
current location time.
Using the CASIO WATCHES
Phone App to Configure
World Time Settings
If the watch is paired with a phone, you can
also use the CASIO WATCHES phone app to
set the World Time city.
l
Configuring World Time Settings
Note
●
World Time cities that can be selected
only by using the CASIO WATCHES
phone app cannot be selected using
watch operations.
Watch Operation Guide 5719
18
To Next Page
Loading...
Need help?
General
