Configuring Dual Time
Settings
30
Dual Time 24-hour
Dual Time
1. Pull out the crown to the first click.
This causes the second hand to move to
12 o’clock.
2. Rotate the crown to change the Dual Time
setting.
●
You can set the Dual Time in 15-minute
increments.
Crown
Dual Time 24-hour hand
Dual Time minute hand
Dual Time hour hand
3. Push the crown back in.
Swapping Current Location
Time and Dual Time
You can swap the time in your current location
with the Dual Time by holding down (B) for at
least three seconds.
●
Pressing (B) also causes face illumination
to turn on. Keep (B) depressed for at least
three seconds.
30
30
After swappingBefore swapping
Dual Time
Dual Time
Current location time
Current location time
Note
●
If you are using the small hour and
minute hands for Dual Time, only the
time in your current location will be
swapped with Dual Time. Dates are
not swapped.
Alarm
The watch will beep when the alarm time is
reached.
●
The beeper is muted in the cases described
below.
ー
When battery power is low
ー
When the watch is at Level 2 power
saving
l
Power Saving
Using the CASIO WATCHES
Phone App to Configure
Alarm Settings
If the watch is paired with a phone, you can
also use the CASIO WATCHES phone app to
set alarms.
l
Setting the Alarm
Watch Operation Guide 5719
19