IPS:Individual Parameter Send
Individual Parameter Send Indicates an individual parameter value send message. When the Instrument
receives this action, it rewrites the value specified by the data field with the specified parameter value.
15.3.6 cat : Category
Format: 0cccccccB
0cccccccB = Category (7bit)
The category indicates the categories of data handled by the System Exclusive Message. The ID number
(ID) of the category is indicated on the left, while the communication operation (Action) is indicated on
the right.
Category Transfer
ID (c) Parameter Set Individual Parameter
00H System A
01H Setup A
02H Patch A
03H Tone A
21H Music Library F
A...Available (Also including when only some parameters are available.)
F...File Information (Not the data itself. Name, size, and other file information only.)
15.3.7 mem : Memory Area ID
Format: 0mmmmmmmB
Specifies the memory area that is the object of the parameter transfer. The following are defined for
this Instrument. Basically, Instrument-specific System Exclusive messages are valid for user area data
only.
mem Data Type Meaning
0 User area Read/write enabled
1 Preset area Read/write disabled
15.3.8 pset : Parameter Set Number
Format: LSB 0nnnnnnnB
MSB 0mmmmmmmB
This field is a 2-byte (LSB, MSB) value indicating the number of the parameter set (mmmmmmmnnnnnnnB
(Binary)) being transferred.
15.3.9 blk Block Number
This supplementary number specifies which block is the object when there are multiple blocks within
the same parameter set.
Format: 0iiiiiiiB (LSB) 0jjjjjjjB 0kkkkkkkB (MSB)
31
To Next Page
Loading...
Need help?
General
